Franka in Progress

I’ve been quiet about Franka for a while, but now I want to return to her. The printout has been hanging on my wall in exactly the same state as it was in the last time I mentioned it, just over a month ago. I figured that it would be fun to share with you the process of how she develops from a frame in a comic album to a wall quilt. I have an idea about what I need to do to get the result I want, but there are many design issues (known as well as unknown) to solve along the way.

For this project, my greatest influence is a textile artist called Pam RuBert. She makes humorous wall quilts with her alter ego Pamdora in the funniest situations. Her quilts always make me laugh. So I’m going to study her techniques for fused raw edge appliqué to help me resolve some of the issues with my Franka quilt. It will be a learning process. I’ve probably jumped in off the deep end again, but never mind. It makes things more exciting.

Starting from the beginning, what I’ve done so far, is, firstly, to scan the image from the comic album with as high a resolution as my scanner could manage (1200 dpi). I then determined the size of the finished quilt (70 x 74 cm / 27” x 29”) and printed the scanned image in full size and greyscale. The printout was 15 A4 pages, which I joined together with sticky tape.

The next step was to determine the different design elements in the image, and to draw them in with a permanent marker. My aim is to be as true as possible to the original, but in some cases I need to simplify or alter the image to make it work with fabric. I also decided that I wanted more space around her hand on the left side of the image. This meant that I needed to add more lines to the flowers above that hand. At the same time I also made some other alterations that I felt were needed.

I’ve used permanent markers and a white gel pen to define the design elements. I want the lines as sharp as possible, as that will help me when I’m making the templates for the fabric pieces. The process of filling in the lines is a bit tedious, but essential, because it forces me to make decisions that will help me with the templates later. A drawback with markers, though, is the fumes. I’ve kept a window open beside me to make sure the room is well ventilated. It’s also a good idea to have a scrap piece of paper underneath, as the markers easily bleed through the paper and stain your work surface (in this case my kitchen table). The white gel pen is for correcting mistakes that I make while marking, for removing lines in the original that need to be left out, and for creating more contrast in less well-defined areas.

When I’ve finished defining the design elements, I’ll start thinking about templates and fabric. I’ll keep you posted on my progress.

Defining the design elements with permanent markers and a white gel pen. 

I moved the border and redrew the flower to the bottom left.

You Gotta Fight

In my previous update I promised you more to come. I had bought a plain white t-shirt that I wanted to jazz up. Well, perhaps ‘jazz up’ isn’t the right expression when you’re alluding to Beastie Boys. Pimp is really the word I need to return to. First, I must confess that I didn’t come up with this idea myself. I saw the text on a t-shirt in a shop and thought it was brilliant. It didn’t come in my colour, though, so I decided to DIY it.

Now I just have to wait for the weather to warm up enough for me to be able to wear it without turning blue.

Here’s how I did it:

1. If you’re going to print on a t-shirt you need to wash it first to get rid of any chemicals that might interfere with the paint.

2. I designed the text in black block letters with the help of a computer and MS Word (font: Stencil), and printed it onto plain printer paper. I drew the arty letters freehand.

3. I traced the text onto a paper called ‘Magic paper’ (similar to freezer paper) and cut the shapes out with a craft knife. Remember to use a self-healing mat to protect your surface. Or use scissors.

4. I then ironed the paper to my t-shirt, put a piece of cardboard inside the shirt to protect the back of the shirt from paint and applied the black textile paint with a foam roller.

5. I used a smaller foam dauber for the arty letters and applied two coats of paint: one purple and one metallic gold to highlight certain areas.

6. When the paint was dry I ironed the print to set the paint.

Cardboard, printout and stencil.

 I removed the stencil carefully, so I can reuse it for another project.

The Hunters Return

My Mum is over for a visit this weekend. She’s going to participate in Naisten Kymppi, which, according to their website, is ‘Finland’s biggest sporting event for women’ with 18 000 women of all ages who run, jog or walk a distance of approx. 10 km (6 miles). Originally, I were to participate too, but because of my injured foot I’ll just have to step aside this time. I’m pretty disappointed, as it has been one of our Mother-And-Daughter-Things, but there’s not much I can do about it.

Mind you, today’s shopping spree is probably equivalent of a 10 km walk. Mum wanted to shop for clothes, so off we went. Four and a half hours later this hunter returned with sore feet, aching back, a blister on a toe, low blood sugar and the gait of a zombie. My limit is normally something like 2 hours (every six months), so this was well past the threshold of pain. But – I brought home some good loot! I won’t bore you with the details, but I did buy a plain white t-shirt to pimp, so stay tuned for more to come.

And, as if the shopping wasn’t enough for my poor foot, after dinner we went for a wee walk. Tadpole Patrol has been neglecting its duties lately, so it was time to check up on the little rascals.

 According to a chart I found, they’re probably about 4 weeks old. I hope the puddle doesn’t dry out before they’re ready to hop away. Fingers crossed!

 I live in the City of Helsinki. This is my neighbourhood. It's hard to believe, isn't it? (No, I don’t live in the little red house.)

Going bananas

I had fun yesterday, making this cool banana-peel pencil case. When I saw it in the spring 2011 issue of Stitch magazine, I knew right away I was going to make it. Not only because it is constructed in such a fun and unusual way, but also because it’s just what I need. I’m tired of having to root around in my pencil case in order to find the pen with the nib size and colour I need. What I find so nifty about this pencil case is that it is standing up and you literally peel away the fabric to reveal all your glorious pens in a nice little bunch with their sizes in plain sight. Excellent!

Banana pencil case about to be peeled:

This appeals to me:

Spread the Word

Today I want to tell you about a Clever Tool. Last autumn I came across some pretty funny-looking brushes that stopped me in my tracks. They weren’t really brushes, because instead of bristles they had a shaped tip made from silicone, and they were called clay or paint shapers. Now, I didn’t have a clue about how I would use them, but they looked like Something That Might Come In Handy For Something. They were pretty cheap too, so I bought them – and forgot about them.

Silicone clay or paint shapers

Much later I was watching an episode of Linda and Laura Kemshall’s Design Matters TV (the episode Watercolour Tricks), and there Linda offered this excellent tip: you can use rubber shaping tools for applying masking fluid. That was very interesting news to me. About the same time that I bought my shaping tools, I had also had a go at masking fluid. The question of how to apply the fluid was still open though. I had ruined two brushes, and I didn’t like wooden sticks. So this tip sounded promising. But I didn’t try it at once – and forgot about it.

When this month’s theme for the Sketchbook Challenge (Can’t Resist) was announced, I knew right away that the time was ripe to put Linda’s tip to the test. And I’m more than pleased with the result. The different tips on the tools make it easy to create a variety of marks with the masking fluid, and it was really easy to remove the masking fluid from the tip: wet or dry, it just peeled away with a light wipe. So if you haven’t tried this already, I recommend that you do. It certainly has made the use of masking fluid less problematic for me.

Here’s an example of some of the shapes that I quickly masked out with the help of my shaping tools. You can see the whole page on Flickr.

What a bummer

I twisted my ankle today at the gym. Second time in 15 months. Not good, not good. But at least I've heard about RICE this time (rest, ice, compression and elevation), so lets hope I manage to reduce the damage. Very inconvenient, I have all sorts of things planned.

C'est la vie.

 (Aaaaaaarggggh)

Blast from the Past

I couldn’t resist updating my blog twice today. After I’d finished my first update, tidied up my mess, phoned my mother (Mother’s Day!), had lunch and done a preliminary spring cleaning of the balcony, I decided it was time to go on an inspection round to check out the tadpole (Swe: grodyngel) situation. It’s a glorious day, so I figured that I’d cope with my summer jacket. I got it out, put it on, put my hands in my pockets, and found a folded piece of paper. Assuming it was an old shopping list, I unfolded it to see what it said before I threw it away. Then I started grinning like a Cheshire cat, because it wasn’t a shopping list. It was a message from myself to myself, which I had put there 8 months ago, before storing away the jacket for the winter. This is what it said:

It’s SPRING

P.S. The tadpoles looked fit and lively ♥